2nd International Electronic Conference on Materials
2–16 May 2016
- Go to the Sessions
- Event Details
Welcome from the Chairs
I am pleased to welcome you to the 2nd International Electronic Conference on Materials (ECM-2). The first edition of this conference held in 2014, was a great success that encouraged the organizing committee to launch the 2nd edition of this e-conference in 2016, May 2nd to 16th. Throughout this event, we aim to cover the following topics:
- Topic A: Materials for Energy Applications
- Topic B: Porous Materials
- Topic C: Manufacturing Processes and Systems
- Topic D: Fibers
- Topic E: Membranes
- Topic F: Inorganics
This is a virtual conference held at www.sciforum.net/conference/ecm-2. Sciforum.net is the platform developed by MDPI and sponsored by the Open Access Journal Materials to organize electronic conferences, and to provide our community with the technical support for hosting our digital conferences. This platform is set in response to the high demand from our community whom might not have always required material and human resources for travelling and participating physically in high quality scientific events.
ECM-2 provides the participants with the unique opportunity to disseminate among their peers, in an open forum, their knowledge and latest research finding in materials field and receive immediately rich feedback from the virtual audience towards their future research directions.
The participation is free of charge – both for authors and attendees. Accepted papers will be gathered in the proceedings of the conference, and selected papers will be published in Materials through invitation from the Editor-in-Chief of Materials.
I am very enthusiastic about this e-conference and am relying of you to make it a successful event again. .
Prof. Maryam Tabrizian
Chair of the 2nd International Electronic Conference on Materials
Editor-in-Chief of the Journal Materials
Professor, Biomedical Engineering
Professor, Faculty of Dentistry
Guggenheim Fellow in Biomedical Sciences
Biomedical Engineering Department
Maryam Tabrizian is professor in the Biomedical Engineering Department at McGill University and FRSQ-Chercheure nationale awardee. She became Guggenheim Fellow in Biomedical Sciences (2010) and the Fellow of the Biomaterials Science & Engineering (FBSE) in 2011 for her contribution to the field of Biomedical Engineering and Biomedical Sciences. She received her PhD degree in Physical Sciences with a multidisciplinary background including physics, chemistry and biology from Université Pierre et Marie Curie-École Supérieure de Physique et de Chimie de Paris in 1990. She was the director of the Centre for Biorecognition and Biosensors (CBB) for 10 years that she has founded in 2001. She has an established expertise in design of biointerfaces to promote cell-substrate or protein-substrate interactions and internationally known for her work in the functional and bioactive biointerface. Her research focus is on the development of engineered surfaces through physical, chemical and biological modifications as well as via the use of advanced micro/nanofabrication technologies to create biocompatible and biofunctional materials for application in nanomedicine and regenerative médicine and Lab-on a Chip devices. She is the author of more than 170 peer-reviewed papers in her field of expertise, over 80 invited lectures, many book chapters, patents, and over 290 communications. She is currently the Editor-in-Chief of Journal of Materials, an Editorial Board Member of ACS-Bioconjugate Chemistry, an Associate Editor of the Journal of Biological Engineering (JBI), and the International Journal of Biomaterials Research and Engineering (IJBRE).
Call for Papers
Instructions for Authors
Submissions should be done by the authors online by registering with www.sciforum.net, and using the "Submit New Abstract" function once logged into system.
- Scholars interested in participating with the conference can submit their abstract (about 200-300 words covering the areas of manuscripts for the proceedings issue) online on this website until 31 March 2016.
- The Conference Committee will pre-evaluate, based on the submitted abstract, whether a contribution from the authors of the abstract will be welcome for the 1st International Electronic Conference on Molecular Science. All authors will be notified by 6 April 2016 about the acceptance of their abstract.
- If the abstract is accepted for this conference, the author is asked to submit his/her manuscript, optionally along with a PowerPoint and/or video presentation of his/her paper (only PDF), until the submission deadline of 15 April 2016.
- The manuscripts and presentations will be available on https://sciforum.net/conference/ecm-2 for discussion and rating during the time of the conference 2–16 May 2016.
- The Open Access Journals Materials, Fibers, Membranes, Inorganics will publish the proceedings of the conference as a Special Issue and accepted papers will be published in the proceedings of the conference. After the conference, the Conference Committee will select manuscripts that may be included for publication in this Special Issue.
Manuscripts for the proceedings issue must have the following organization:
- Full author names
- Affiliations (including full postal address) and authors' e-mail addresses
- Results and Discussion
Authors are encouraged to prepare a presentation in PowerPoint or similar software, to be displayed online along with the Manuscript. Slides, if available, will be displayed directly in the website using Sciforum.net's proprietary slides viewer. Slides can be prepared in exactly the same way as for any traditional conference where research results can be presented. Slides should be converted to the PDF format before submission so that our process can easily and automatically convert them for online displaying.
Besides their active participation within the forum, authors are also encouraged to submit video presentations. If you are interested in submitting, please contact the conference organizer at email@example.com to get to know more about the procedure. This is an unique way of presenting your paper and discuss it with peers from all over the world. Make a difference and join us for this project!
Authors that wish to present a poster only, i.e. without proceedings paper, can do so in section G. - Posters of this conference. Posters will be available on this conference website during and after the event. Like papers presented on the conference, participants will be able to ask questions and make comments about the posters. Posters that are submitted without paper will not be included in the proceedings of the conference.
Submission: Manuscripts should be submitted online at www.sciforum.net/login by registering and logging in to this website.Accepted File Formats
- MS Word: Manuscript prepared in MS Word must be converted into a single file before submission. When preparing manuscripts in MS Word, the Electronic Conference on Materials Science Microsoft Word template file (see download below) must be used. Please do not insert any graphics (schemes, figures, etc.) into a movable frame which can superimpose the text and make the layout very difficult.
- Electronic Conference on Materials Science MS Word Template File
- References: References must be numbered in order of appearance in the text (including tables and legends) and listed individually at the end of the manuscript. We recommend preparing the references with a bibliography software package, such as EndNote, ReferenceManager or Zotero to avoid typing mistakes and duplicated references. Citations and References in Supplementary files are permitted provided that they also appear in the main text and in the reference list. In the text, reference numbers should be placed in square brackets [ ], and placed before the punctuation; for example , [1–3] or [1,3]. For embedded citations in the text with pagination, use both parentheses and brackets to indicate the reference number and page numbers; for example  (p. 10). or  (pp. 101–105). The Reference list should include the full title as recommended by the ACS style guide. The style file for endnote, MDPI.ens, can be found athttps://endnote.com/downloads/style/mdpi
- Author List and Affiliations: Authors' full first and last names must be provided. The initials of any middle names can be added. The PubMed/MEDLINE standard format is used for affiliations: complete address information including city, zip code, state/province, country, and all email addresses. At least one author should be designated as corresponding author, and his or her email address and other details should be included at the end of the affiliation section. Please read the criteria to qualify for authorship.
- Figures, Schemes and Tables: All figure files should be separately uploaded during submission. Figures and schemes must be provided at a sufficiently high resolution (minimum 1000 pixels width/height, or a resolution of 300 dpi or higher). All Figure file formats are accepted. However, TIFF, JPEG, EPS and PDF files are preferred. Materials can publish multimedia files in articles or as supplementary materials. Please get in touch with the Editorial office for further information. All Figures, Schemes and Tables should also be inserted into the main text close to their first citation and must be numbered following their number of appearance (Figure 1, Scheme I, Figure 2, Scheme II, Table 1, etc.). All Figures, Schemes and Tables should have a short explanatory title and a caption. All table columns should have an explanatory heading. To facilitate the copy-editing of larger tables, smaller fonts may be used, but in no less than 8 pt. in size. Authors should use the Table option of Microsoft Word to create tables. For multi-panel figures, the file must contain all data in one file. For tips on creating multi-panel figures, please read the helpful advice provided by L2 Molecule. Authors are encouraged to prepare figures and schemes in color (RGB at 8-bit per channel). Full color graphics will be published free of charge.
Authors wishing to publish their papers are asked to abide to the following rules:
- Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission.
- Authors should accurately present their research findings and include an objective discussion of the significance of their findings.
- Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work.
- Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication.
- Simultaneous submission of manuscripts to more than one journal is not tolerated.
- Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted).
- If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken. Please refer to our policy regarding publication of publishing addenda and corrections.
- Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license.
- Plagiarism, data fabrication and image manipulation are not tolerated.
MDPI AG, the publisher of the Sciforum.net platform, is an open access publisher. We believe that authors should retain the copyright to their scholarly works. Hence, by submitting a Communication paper to this conference, you retain the copyright of your paper, but you grant MDPI AG the non-exclusive right to publish this paper online on the Sciforum.net platform. This means you can easily submit your paper to any scientific journal at a later stage and transfer the copyright to its publisher (if required by that publisher).
List of accepted submissions (12)
Ab initio generation of binary alloy foams: the case of amorphous Cu64Zr36
, , ,
Submitted: 29 Mar 2016
Abstract: Show Abstract
|, , ,||
We report ab initio-based approaches to generate amorphous nanoporous Cu64Zr36 bulk metallic glass. Starting with two different initial configurations: an unstable crystalline sample (cCu64Zr36) and an amorphous sample (aCu64Zr36), the transferable expanding lattice method–previously used with semiconducting and pure metal systems– was applied in order to increase the volume of the cells (and atomic distances proportionally) so that the density was halved, thus obtaining 50% porosity. The initial samples were subjected to either constant room temperature ab initio molecular dynamics or geometry optimization only, which resulted in well-defined pores growing along specific spatial directions. Herewith we report partial and total pair distribution functions, as well as nearest neighbor distances and coordination numbers which let us discern discrepancies in backbone and pore topology. Also we report the bond-angle distribution which let us track the presence of icosahedral-like short-range order which is often related to the glass forming ability in amorphous alloys. The so-called depletion of the pair distribution function at mid range order reported in the literature, along with an estimation of pore sizes are also reported.
Failure analysis of hydrophilic and hydrophobic aerogels under liquid nitrogen thermal shock
, , , ,
Submitted: 31 Mar 2016
Abstract: Show Abstract
|, , , ,||N/A||
As the best thermal insulator, aerogels could be used for high-efficiency insulation under exoplanet environment. There is the high day-night temperature difference in the exoplanets, thus the failure analysis of the aerogels under thermal shock could be studied. In this paper, hydrophilic and hydrophobic fiber-reinforced silica aerogels were forced to undergo liquid nitrogen-room temperature thermal shocks. Thermal conductivity, mechanical property and the microstructure were characterized for understanding the failure mechanism. It was found that after multiple shocks, the thermal conductivity of hydrophilic aerogel increased 35.5% after the first shock and kept in a high value, while that of the hydrophobic aerogel increased 19.5% and kept in a relatively low value. Pore size distribution results showed that after the first shock the peak pore size of the hydrophilic aerogel increased from 18 nm to 25 nm due to the shrinkage of the skeleton, while the peak pore size of the hydrophobic aerogel kept at ~9 nm probably induced by the spring-back effect. The high-strain hardening and low-strain soften behaviors further demonstrated the skeleton shrinkage of the hydrophilic aerogel. The existence of the free water in the infrared spectra of both aerogels indicated the driving force of the skeleton shrinkage may be the volume change of the absorbed water during freezing process. For further demonstrating the mechanism, the aerogels were treated at 80 oC under vacuum environment before conducting shock experiments. After the first shock, the thermal conductivities of the hydrophilic and hydrophobic aerogels were increased only 14.0% and 0.4%, respectively. In addition, multiple shock experiments showed that the failure processes of the hydrophilic and hydrophobic aerogels are irreversible and reversible, respectively, revealing their different failure modes.
Recent trends in development of self‐flowing mortar incorporating supplementary cementitious materials
, , ,
Submitted: 06 Apr 2016
Abstract: Show Abstract
|, , ,||N/A||
Self‐flowing mortar (SFM) is being popular in recent time. Its’ easy‐placement nature makes it suitable for narrow or congested reinforced places. To comply with modern‐age needs, many supplementary cementitious materials (SCMs) are gaining importance nowadays. Using industrial and agricultural wastes as SCM, ensures proper management of many hazardous materials and saves cost as well. Incorporation of these two techniques can offer cost‐effective and environment‐friendly solutions to many construction problems. Many researchers studied the effect of different SCMs on mortar properties in recent years. The objective of this study is to summarize the findings of recent experiments. This will help the experts of this field to optimize their mix design easily, as well as, the researchers to find the research gap and determine the direction of their future studies.
Wood filled plastics – machining and surface quality
, , , , ,
Submitted: 16 Feb 2016
Abstract: Show Abstract
|, , , , ,||
Components made of wood plastic composites are used in exterior application, where in comparison with nature wood composite do not require further maintenance (predetermine to long-term usage for its physical and mechanical properties). Adding wood to plastic significantly increases mechanical properties (utmost stiffness), reduces thermal expansion of the plastic and decreases of cost. Design of product is not limited by material and technology and is possible to product different types of profile and shapes. Nowadays demand on wood plastic composites is with increasing character. For this reason, a better understanding of this composite material in regards to machining and texture of surface is necessary. The paper deals with a comparison of the surface roughness of Wood Plastic Composite with traditional wood (oak) after turning. Presented paper is focused on observation changes of average maximum height Rz with change of speed of feeds f and speed of rotations nc (simultaneously compare predicted and real values of surface roughness parameter Rz). Experiment was realized with monolithic cutting tool made of high speed steel (EN ISO HS6-5-2) with positive geometry. Machining of WPC was in direction parallel to extruding axe, and verification sample in parallel fiber direction. Graphical evaluation of experimental values was realized using software OriginLab. Detecting surface quality was made using microscopic camera DigiMicro 2.0
Experimental testing of material Mosten GB 005 on various concertation of recycled material
, , , , ,
Submitted: 17 Feb 2016
Abstract: Show Abstract
|, , , , ,||
Main objective of presented scientific article is to define mechanical properties of polypropylene Mosten GB 005 in dependence on prescribed precentral ratio of recycled regranulate. Polypropylene Mosten GB 005 is a general purpose homopolymer, intended for injection moulding and for production of thermoforming films. It can be also used for production of various compounds. Experimental verification of mechanical properties was realized by testing samples produced with various concentrations of the recycled material. Experimental samples were realized undergo tests to obtain mechanical properties of produced new material (on these tests were realized and evaluated rheological tests, tensile and flexural tests as well as hardness and Charpy impact toughness tests). Experimental samples were divided into 7 classes depend on percentage ratio of added recycled material into raw material concretely 0%,10%,20%,30%,50%,70% a 100 %. Mentioned mechanical tests were realized according to ISO standards valid for individual testing method. Each testing method was carried out using prescribed numbers of testing samples. The flexure test was realized on five experimental testing samples and subsequent tests were carried out on ten experimental samples from each class of produced material. Presented scientific article is also focused on changes in microstructures of testing materials in depends on percentage ratio of recycled regranulate. Recycled regranulate of thermoplastic was not necessity to additionally modify. Presented article also contain experimental verification of thermal properties using Differential Scanning Calorimetry (DSC).
List of Authors (45)
- Abstract Submission: 31 Mar. 2016
- Acceptance Notification: 6 Apr. 2016
- Full Paper Submission: 15 Apr. 2016
- Conference Open: 2–16 May 2016
Chair of the 2nd International Electronic Conference on Materials Science
Prof. Dr. Maryam Tabrizian
Editor-in-Chief of Materials
Department of Biomedical Engineering, Faculty of Medicine/Faculty of Dentistry,
Duff Medical Science Building, Room 313, 3775 University Street, Montreal, QC, H3A 2B4,
Dr. Christof Schneider, ETH Zurich, Switzerland
Dr. Sofoklis Makridis, University of Bolton, UK
Prof. Dr. Rafael Luque, Universidad de Córdoba, Spain
Prof. Dr. Sanjay Mathur, University of Cologne, Spain
Prof. Dr. Stephen C. Bondy, University of California, USA
Prof. Dr. Spas D. Kolev, University of Melbourne, Australia
Prof. Dr. Duncan H. Gregory, University of Glasgow, UK
Dr. Franck Vazquez
Hongmei ZuoMin Su
Tel. +41 61 683 77 35
- The following topics are relevant and within the scope of this journal:
- Textile fibers
- Natural fibers and biological microfibrils
- Metallic fibers
- Carbon fibers
- Silicon carbide fibers
- Mineral fibers
- Cellulose fibers
- Polymer fibers
- Microfibers, nanofibers and nanotubes
- New processing methods for fibers
- Chemistry of fiber materials
- Physical properties of fibers
- Exposure to and toxicology of fibers
- Biokinetics of fibers
- The diversity of fiber origins
Fibers website: mdpi.com/journal/fibers
Professor Stephen Bondy, Univ. of California, Irvine
This journal covers all topics related to synthetic, inorganic and biological membranes.
Topics of interest include, but are not limited to:
- membrane permeation and membrane transport
- membrane structure and function
- membrane processes and phenomena
- biological membranes
- non-biological membranes
- membrane material or polymer
- separation technology
Journal website: http://www.mdpi.com/journal/membranes
Topics include but are not limited to:
- synthesis and characterization of inorganic compounds, complexes and materials
- structure and bonding in inorganic molecular and solid state compounds
- spectroscopic and magnetic properties of inorganic compounds
- chemical reactivity, physical properties and applications of inorganic compounds and materials
- mechanisms of inorganic reactions
- organometallic compounds
- inorganic cluster chemistry
- heterogeneous and homogeneous catalytic reactions promoted by inorganic compounds
- thermodynamics and kinetics of significant new and known inorganic compounds
- supramolecular systems and coordination polymers
- bio-inorganic chemistry and applications of inorganic compounds in biological systems and medicine
- environmental and sustainable energy applications of inorganic compounds and materials
Journal website: http://www.mdpi.com/journal/inorganics